Gas Powered Air Compressors
Industrial Gas-Powered Series
Pumps
- All Cast Iron for long life & quiet operation
- Slow R.P.M. for quiet operation & long life
- Tapered Roller Bearings at both ends of crankshaft for superior support & less friction
- Precision Steel Connecting Rods with automotive type rod insert bearings at crankshaft & bearings at wrist pin for long service, life, & reliability
- Disc & Spring Valves for easy service, higher efficiency and reliability
- Pistons Have 4-rings for higher efficiency & less oil carry-over
- Centrifugal Unloader for loadless start-up every time
Tanks, Motors, Controls
- Powder Coated ASME Tanks with 4 legs on verticals, channel on horizontals
- ASME Safety Valves
- Metal Belt Guard totally enclosed
- Copper Discharge & Unloader Tube or Stainless-steel Braided Flex Line
- Heavy Duty 1725 R.P.M. industrial motors, with full 15% service factor or higher
Generator (G)
- 5k Watts/ 5.5k Surge Watts
- 2 X 115 Volt / 17 Amp Outlets
- 1 X 230 Volt / 23 Amp Outlet
Welder (W)
- 240 Amp DC Arc
- Universal 55mm quick connects
- Duty Cycle: 130A = 100%, 180A = 60%, 240A = 35%
Gas Powered - 2 Stage - Piston Air Compressors
Includes Oil Drain Kit, Throttle Controls, Fuel Tank, & 12V Alternator. 12V battery not included.
| Honda Model |
Starter Type |
Tank Gal/Type |
Pump R.P.M. |
CFM @ 0 PSI |
CFM @ 175 PSI |
LxWxH (Inches) |
Wt. (Lbs) |
Unit Model |
| GX390 |
Rope / Electric |
30 Horizontal |
995 |
35.0 |
28.1 |
43x22x42 |
550 |
I13GH3HC1 |
| GX390 |
Rope / Electric |
30 Horizontal |
635 |
37.0 |
30.3 |
48x22x40 |
605 |
I13GH3HC2 |
| GX630 |
Electric |
30 Horizontal |
885 |
55 |
43.6 |
50x34x43 |
640 |
I20GH3HC2 |
| GX390 |
Rope / Electric |
30 Horizontal |
808 |
24.7 |
19.7 |
48x23x42 |
650 |
I13GH3HC1GW |
Factory Mountable Options
Parts below may be purchased as a package or individually.
|
Pump Model |
| C1 |
C2 |
| Part |
Low Oil Control |
6304 |
| Hour Meter |
HRM50 |
| Electronic Auto Drain |
SDV03 |
| Dual Control |
DC1 |
DC2 |
| Intake Noise Silencer |
SA100 |
| Right from the Start Kit |
RFS001 |
| Belt Guard Aftercooler |
BGAC1 |
BGAC2 |
| All Options Package (Save 10%) |
AOC1 |
AOC2 |
Parts below may be purchased factory mounted or loose.
-
Belt Tensioner:
- 256D (20 HP)
- 284D (25 & 30 HP)
|
- Air Operated Valve: ADVSM
- Time Delay: TD100
|
Right from the Start Kit
This kit is included in the All Options Package. Parts may also be purchased individually.
|
RFS001 |
| Part |
Semi-Synthetic Oil |
GA5W30 |
| Vibration Pads |
VP100 |
| Ball Valve |
BV75 (3/4") |
| 18" Flex Hose |
VA075 (3/4") |
| Air Filter |
16D |
Maintenance Oil
5W/30, Semi-Synthetic. Rating 4 months or 400 hours.
| Part # |
Size |
| QT5W30 |
1 Quart |
| GA5W30 |
1 Gallon |
10W/30, Full Synthetic. Rating 8 months or 800 hours.
| Part # |
Size |
| QT10W30 |
1 Quart |
| GA10W30 |
1 Gallon |
Honda Oil Drain Kits
| Part # |
Applicable Models |
| HON1010 | GX100 – GX200 |
| HON1012 | GX240 – GX390 |
| HON1420 | GX630 – GX660 |
Contractor Gas-Powered Series
- Paper Filter/Silencers provides clean air and quiet operation
- Finned Copper Discharge Tube for strength & increased heat dissipation
- Independent connecting rod, wrist pin and 3 piston rings
- Easy Read Sight Glass to insure proper oil level
- Head Unloaders-VS-Dump Valves for better cooling & less load on engine in unloaded mode
- Ball Bearings at both ends of crankshaft for less friction
- Powder Coated ASME Tank w/ safety valve installed
- V-Cylinder Design for 360 degree cooling & long life
- Smooth reliable Honda engines throttle control
Gas Powered - Single Stage - Piston Air Compressors
1725 RPM, Wheelbarrow or 2-Wheel Design.
| Honda Model |
Tank Gal/Type |
CFM @ 0 PSI |
CFM @ 100 PSI |
Pump R.P.M. |
LxWxH (Inches) |
Wt. (Lbs) |
Unit Model |
| GX160 |
8 Twin Tank Wheelbarrow |
18.6 |
11.6 |
1380 |
38x18x26 |
185 |
PUK5508G |
| GX160 |
20 2-Wheel Horizontal |
18.6 |
11.6 |
1380 |
33x18x33 |
195 |
PUK5520G |
| GX270 |
8 Twin Tank Wheelbarrow |
23.9 |
18.6 |
1380 |
42x18x28 |
250 |
PUK9008G |