Conrader Check Valves

List Grid
Set Descending Direction

Items 26-50 of 88

  • 1/2" FPT x 1/2" MPT In-Tank Check Valve
    $12.25
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • Valves are 100% Tested for Backflow Leakage Performance
    • 1 PSI Cracking Pressure
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
    • 1/8 NPT Tapped Port is Standard
    • Everseal 483 Sealant Standard
  • 1/2" FPT x 1/2" MPT In-Tank Check Valve
    $12.47
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • Valves are 100% Tested for Backflow Leakage Performance
    • 1 PSI Cracking Pressure
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
    • 2 - 1/8 NPT Tapped Ports are Standard
    • Everseal 483 Sealant Standard
  • 1/2" FPT x 3/4" MPT In-Tank Check Valve
    $15.62
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • Valves are 100% Tested for Backflow Leakage Performance
    • 1 PSI Cracking Pressure
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
    • 1/8 NPT Tapped Port is Standard
    • Everseal 483 Sealant Standard
  • 1/2" FPT x 3/4" MPT In-Tank Check Valve
    $16.60
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • Valves are 100% Tested for Backflow Leakage Performance
    • 1 PSI Cracking Pressure
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
    • 2 - 1/8 NPT Tapped Ports are Standard
    • Everseal 483 Sealant Standard
  • 1/2" Inverted Flare x 1/2" MPT In-Tank Check Valve
    $11.13
    • Construction: C360 Machined One Piece Brass Body, Plated Steel Tank End, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • Valves are 100% Tested for Backflow Leakage Performance
    • 1 PSI Cracking Pressure
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
    • 1/8 Inverted Flare FPT Tap and 1/8 FPT Tap
    • Everseal 483 Sealant Standard
  • 1/2" JIC Flare x 1/2" MPT In-Tank Check Valve
    $8.40
    • Construction: C360 Machined Brass Outlet, Plated Steel Tank End, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • Valves are 100% Tested for Backflow Leakage Performance
    • 1 PSI Cracking Pressure
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
    • 1/8 NPT Tapped Port is Standard
    • Everseal 483 Sealant Standard
  • 1/2" JIC Flare x 1/2" MPT In-Tank Check Valve
    $9.70
    • Construction: C360 Machined Brass Outlet, Plated Steel Tank End, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • Valves are 100% Tested for Backflow Leakage Performance
    • 1 PSI Cracking Pressure
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
    • 2 - 1/8 NPT Tapped Ports are Standard
    • Everseal 483 Sealant Standard
  • 1/4" FPT In-Line Check Valve 12 SCFM
    $17.75
    • Applications: Air Compressor Discharge Lines
    • Construction: Bronze Body, Corrosion Resistant Stainless Steel Spring to Ensure Long Life,15% Glass Filled Teflon Poppet and C360 Machined Brass Cap
    • Can Be Mounted Vertical or Horizontal
    • 1/8 NPT Unloader Port is Standard
    • Pressure Range: 250 PSI
    • Maximum Temperature: 450 F
    • Cracking Pressure: 3 PSI
    • Repairable
  • 1/4" FPT In-Line Check Valve 2.5 SCFM
    $11.08
    • Construction: C360 Machined Brass Body, and Cap, Viton O-Ring, and Nitrile Disc
    • 1 PSI Cracking Pressure
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 300 F
  • 1/4" FPT In-Line Vertical Check Valve 10 SCFM
    $16.20
    • Applications: Compressor Applications Where an In Tank Check Valve Will Not Fit, the CLB Valve Can Conveniently be Installed Right in the Discharge Line of the Compressor
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • 1 PSI Cracking Pressure
    • A Plugged 1/8 NPT Unloader Port is Standard
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
  • 1/4" FPT x 1/2" MPT In-Tank Check Valve
    $9.87
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • Valves are 100% Tested for Backflow Leakage Performance
    • 1 PSI Cracking Pressure
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
    • 1/8 NPT Tapped Port is Standard
    • Everseal 483 Sealant Standard
  • 1/4" MPT x 1/4" FPT In-line Check Valve 9 SCFM
    $7.55
    • Applications: Tank Check Valves for Small Air Compressors or Components in Pneumatic Circuits
    • Pressure Range: 250 PSI
    • Maximum Temperature: 350 F
    • Construction: C360 Machined Brass Body, With Viton O Rings, Brass Poppet and Washer, Stainless Steel Spring
    • Bubble Tight Sealing Capabilities at Low Pressure Drops
    • Everseal 483 Sealant Standard
  • 1/4"x 1/4" MPT In-Line Check Valve 9 SCFM
    $7.18
    • Applications: Tank Check Valves for Small Air Compressors or Components in Pneumatic Circuits
    • Pressure Range: 250 PSI
    • Maximum Temperature: 350 F
    • Construction: C360 Machined Brass Body, With Viton O Rings, Brass Poppet and Washer, Stainless Steel Spring
    • Bubble Tight Sealing Capabilities at Low Pressure Drops
    • Everseal 483 Sealant Standard
  • 1/8" FPT In-Line Check Valve 12 SCFM
    $17.62
    • Applications: Air Compressor Discharge Lines
    • Construction: Bronze Body, Corrosion Resistant Stainless Steel Spring to Ensure Long Life,15% Glass Filled Teflon Poppet and C360 Machined Brass Cap
    • Can Be Mounted Vertical or Horizontal
    • 1/8 NPT Unloader Port is Standard
    • Pressure Range: 250 PSI
    • Maximum Temperature: 450 F
    • Cracking Pressure: 3 PSI
    • Repairable
  • 1/8" Plug
    $0.37
    • 1/8 Plug
  • 2" FPT In-Line Check Valve 220 SCFM
    $267.62
    • Applications: Air Compressor Discharge Lines
    • Construction: Bronze Body, Corrosion Resistant Stainless Steel Spring to Ensure Long Life,15% Glass Filled Teflon Poppet and C360 Machined Brass Cap
    • Can Be Mounted Vertical or Horizontal
    • 1/8 NPT Unloader Port is Standard
    • Pressure Range: 250 PSI
    • Maximum Temperature: 450 F
    • Cracking Pressure: 3 PSI
    • Repairable
  • 3/4 Compression x 1" MPT In-Tank Check Valve w/Plug
    $25.12
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • Valves are 100% Tested for Backflow Leakage Performance
    • 1 PSI Cracking Pressure
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
    • 1/8 NPT Tapped Port with Plug is Standard
    • Everseal 483 Sealant Standard
  • 3/4 Compression x 3/4 MPT In-Tank Check Valve w/Plug
    $14.07
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • Valves are 100% Tested for Backflow Leakage Performance
    • 1 PSI Cracking Pressure
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
    • 1/8 NPT Tapped Port with Plug is Standard
    • Everseal 483 Sealant Standard
  • 3/4 FPT x 1" MPT In-Tank Check Valve w/Plug
    $26.58
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • Valves are 100% Tested for Backflow Leakage Performance
    • 1 PSI Cracking Pressure
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
    • 1/8 NPT Tapped Port with Plug is Standard
    • Everseal 483 Sealant Standard
    • Repairable
  • 3/4 FPT x 1-1/2 MPT In-Tank Check Valve w/Plug
    $113.80
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • Valves are 100% Tested for Backflow Leakage Performance
    • 1 PSI Cracking Pressure
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
    • 1/8 NPT Tapped Port with Plug is Standard
    • Everseal 483 Sealant Standard
    • Repairable
  • 3/4 FPT x 3/4 MPT In-Tank Check Valve
    $12.08
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • Valves are 100% Tested for Backflow Leakage Performance
    • 1 PSI Cracking Pressure
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
  • 3/4 FPT x 3/4 MPT In-Tank Check Valve Less Sealant
    $15.77
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • Valves are 100% Tested for Backflow Leakage Performance
    • 1 PSI Cracking Pressure
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
    • 1/8 NPT Tapped Port is Standard
  • 3/4 FPT x 3/4 MPT In-Tank Check Valve w/Plug
    $16.13
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • Valves are 100% Tested for Backflow Leakage Performance
    • 1 PSI Cracking Pressure
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
    • 1/8 NPT Tapped Port with Plug is Standard
    • Everseal 483 Sealant Standard
    • Repairable
  • 3/4" Compression x 1" MPT In-Tank Check Valve
    $24.77
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • Valves are 100% Tested for Backflow Leakage Performance
    • 1 PSI Cracking Pressure
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
    • 1/8 NPT Tapped Port is Standard
    • Everseal 483 Sealant Standard
  • 3/4" Compression x 1" MPT In-Tank Check Valve
    $26.43
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • Valves are 100% Tested for Backflow Leakage Performance
    • 1 PSI Cracking Pressure
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
    • 2 - 1/8 NPT Tapped Ports are Standard
    • Everseal 483 Sealant Standard
Page
Your cart View Cart
Filter by

Category

Manufacturer / Brand

Stock Status