In-Line Check Valves

List Grid
Set Ascending Direction

10 Items

  • Shuttle Control Check Valve
    $27.88
    • A Shuttle Control Valve Designed for Applications Where it is Necessary to Control One Device From Two Sources
    • 1/8 FPT x 1/4 FPT x 1/4 Compression
    • Features a Positive Sealing Piston and Brass Body Construction
    • Maximum Working Pressure: 500 PSI
    • Maximum Operating Temp: 250 F
  • 3/8" FPT In-Line Vertical Check Valve 12 SCFM
    $19.27
    • Applications: Compressor Applications Where an In Tank Check Valve Will Not Fit, the CLB Valve Can Conveniently be Installed Right in the Discharge Line of the Compressor
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • 1 PSI Cracking Pressure
    • A Plugged 1/8 NPT Unloader Port is Standard
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
  • 3/4" FPT In-Line Vertical Check Valve 60 SCFM
    $37.02
    • Applications: Compressor Applications Where an In Tank Check Valve Will Not Fit, the CLB Valve Can Conveniently be Installed Right in the Discharge Line of the Compressor
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • 1 PSI Cracking Pressure
    • A Plugged 1/8 NPT Unloader Port is Standard
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
  • 3/4" FPT In-Line Vertical Check Valve 30 SCFM
    $29.12
    • Applications: Compressor Applications Where an In Tank Check Valve Will Not Fit, the CLB Valve Can Conveniently be Installed Right in the Discharge Line of the Compressor
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • 1 PSI Cracking Pressure
    • A Plugged 1/8 NPT Unloader Port is Standard
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
  • 1/4"x 1/4" MPT In-Line Check Valve 9 SCFM
    $7.18
    • Applications: Tank Check Valves for Small Air Compressors or Components in Pneumatic Circuits
    • Pressure Range: 250 PSI
    • Maximum Temperature: 350 F
    • Construction: C360 Machined Brass Body, With Viton O Rings, Brass Poppet and Washer, Stainless Steel Spring
    • Bubble Tight Sealing Capabilities at Low Pressure Drops
    • Everseal 483 Sealant Standard
  • 1/4" MPT x 1/4" FPT In-line Check Valve 9 SCFM
    $7.55
    • Applications: Tank Check Valves for Small Air Compressors or Components in Pneumatic Circuits
    • Pressure Range: 250 PSI
    • Maximum Temperature: 350 F
    • Construction: C360 Machined Brass Body, With Viton O Rings, Brass Poppet and Washer, Stainless Steel Spring
    • Bubble Tight Sealing Capabilities at Low Pressure Drops
    • Everseal 483 Sealant Standard
  • 1/4" FPT In-Line Vertical Check Valve 10 SCFM
    $16.20
    • Applications: Compressor Applications Where an In Tank Check Valve Will Not Fit, the CLB Valve Can Conveniently be Installed Right in the Discharge Line of the Compressor
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • 1 PSI Cracking Pressure
    • A Plugged 1/8 NPT Unloader Port is Standard
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
  • 1/4" FPT In-Line Check Valve 2.5 SCFM
    $11.08
    • Construction: C360 Machined Brass Body, and Cap, Viton O-Ring, and Nitrile Disc
    • 1 PSI Cracking Pressure
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 300 F
  • 1/2" FPT In-Line Vertical Check Valve 20 SCFM
    $20.67
    • Applications: Compressor Applications Where an In Tank Check Valve Will Not Fit, the CLB Valve Can Conveniently be Installed Right in the Discharge Line of the Compressor
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • 1 PSI Cracking Pressure
    • A Plugged 1/8 NPT Unloader Port is Standard
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
  • 1" FPT In-Line Vertical Check Valve 60 SCFM
    $58.85
    • Applications: Compressor Applications Where an In Tank Check Valve Will Not Fit, the CLB Valve Can Conveniently be Installed Right in the Discharge Line of the Compressor
    • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
    • 1 PSI Cracking Pressure
    • A Plugged 1/8 NPT Unloader Port is Standard
    • Maximum Pressure: 500 PSI
    • Maximum Temperature: 450 F
Your cart View Cart
Filter by

Stock Status